'air flow meter'

Effective removal of water vapour (to +3°C pdp) from compressed air at low operating costs. Dual frequency ready, with volume flows up to 10800m³/h (50Hz) or 11812m³/hr (60Hz) @ 7 barg.

High efficiency coalescing and dry particulate filters with very low pressure drop providing excellent energy savings. The Parker OIL-X range of die-cast compressed air filters has been designed from the outset to meet the air quality requirements of all editions of ISO8573-1, when validated in accordance with the stringent requirements of ISO12500-1. An efficient and cost effective manufacturing process is a major factor in maintaining the profitability and growth of your business. Designed using domnick hunter filtration technology, OIL-X filters are designed to not only minimise the use of compressed air and electrical energy in their operation, but also to significantly reduce the operational costs of the compressor by minimising pressure losses. OIL-X filters incorporate a number of unique and patented design features to minimise differential pressure and provide a filter and element combination where the differential pressure starts low and stays low to maximise energy savings and provide the lowest lifetime costs without compromising air quality. Features • For the removal of bulk liquid, water and oil aerosols, atmospheric dirt and solid particles, rust, oil vapour, pipescale and micro-organisms • Coalescing filter performance tested to the stringent requirements of ISO12500-1, ISO8573-2 and ISO8573-4 • Dry particulate filter performance tested in accordance with the requirements of ISO8573-4 Benefits • Highest air quality • Lowest operational differential pressure • Lowest energy consumption • Lowest CO2 emissions • Lowest total cost of ownership Sizing and Selection To ensure quoted air purity specification is met, more than one filtration grade may be required. Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet. For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.

Refrigerated compressed air dryers effecitve in removing water vapor, down to levels in accorance with ISO8573-1, from compressed air flow rates between 10-250 scfm while maintaining industry leading low operating costs.

SimplAir Aluminum Piping The new SimplAir piping system from Ingersoll Rand uses marine-grade aluminum pipes to efficiently distribute leak-free supplies of high-flow compressed air and other inert gasses and support vacuum systems as well. For lower cost, higher performance, easier installation, and less maintenance than systems made of competing materials, the Simplair piping system is the best choice. All-metal system — Safer and more reliable than plastic High pipe-to-fitting engagement — Increases structural integrity Corrosion-resistant — Minimizes turbulence and pressure loss Recyclable piping material — Aluminum piping material can be recycled Lightweight and easy to handle — Up to 90% lighter than comparable steel piping Easy to install/modify — For faster, simpler setups and changes All-metal system — Safer and more reliable than plastic High pipe-to-fitting engagement — Increases structural integrity Corrosion-resistant — Minimizes turbulence and pressure loss Recyclable piping material — Aluminum piping material can be recycled Lightweight and easy to handle — Up to 90% lighter than comparable steel piping Easy to install/modify — For faster, simpler setups and changes

The 55 – 75 kW range of lubricated screw compressors comprises of fixed speed and regulated speed (RS) models. The new compressors deliver efficiency improvements of up to 8 per cent when compared with previous models, plus a 5 per cent higher flow rate. The new compressors are available in both fixed and regulated speeds – which can help reduce a system’s total cost of ownership significantly – as well as air-cooled and water-cooled options. Pressure range: 5 to 13 bar Volume flow: 2.1 to 14.03 m³/min Motor power: 55 to 75 kW

A Scroll Compressor is also referred to as a Spiral Compressor, a scroll pump or a scroll vacuum pump. The Rotary Spiral Scroll design creates a continual compressed airflow over multiple stages and there is no need for oil lubrication. A scroll compressed air system runs quieter and more smoothly than a reciprocating version because there are only two moving parts – a fixed scroll and an orbital scroll. Fewer parts make the scroll compressor energy-efficient, highly reliable, and less prone to mechanical failure. Compared with a rotary screw compressor, a scroll compressor vibrates less and is almost noiseless. Scroll compression An orbiting (rotating) scroll and fixed scroll housing are mated to create the compression chambers. The continual movement of the orbiting scroll moves atmospheric air from the intake toward the center, compressing the air into progressively smaller areas. The compressed air is directed to the center discharge port of the compressor. Discharge pressure is accomplished during multiple stages of compression, resulting in a continuous intake suction and discharge. High reliability and high quality compressed air Easy operation and easy installation High flexibility Small footprint Energy efficient fully integrated airend design Low maintenance costs

L02 – L06, Flow: 0.18 to 0.89 m³/min, 10 bar low-noise compressors, receiver mounted with refrigerant dryer options available. To meet the requirements of the individual customer demands the range of compressors can be combined with numerous options to provide everything from a stand alone compressor, receiver mounted or complete Airstation including refrigerant dryer. Compressor Brand CompAir Weight 151Kg-179kg|242kg-339Kg|261kg-364kg Full Features Base Mounted| Receiver Mounted| Airstation Model No CompAir L02 – L06 Motor Rating 2.2/3/4/5.5/7.5 HP Free Air Delivered 6.3 cfm to 31.5 cfm Noise Level 70 DB(A)

PNEUDRI MXLE Large Flow Air Dryer Large flow low energy modular compressed air dryers providing pressure dew points of -70°C and -40°C with flow rates up to 2040 m³/hr @ 7 barg, even greater flow rates can be achieved by multi-banking the dryers.